Gestetner G060, Service Manual

Page: 809 / 1106

F
ax Un
it
G
307
SERVICE RAM ADDRESSES
SM 3-85 G307
NOTE: If the number of characters is less than the maximum (20 for RTI, 64 for
TTI), add a stop code (FF[H]) after the last character.
6802E0 to 6802E2(H) - PSTN-1 line settings
6802E0
Bits 0 and 1: PSTN access method from behind a PABX.
Bit 1 0 Setting
0 0 Loop start
0 1 Ground start
1 0 Flash start
1 1 Not used
Bit 2: Telephone line type.
0: PSTN, 1: PABX
Bits 3 and 4: Dialing type.
Bit 4 3 Setting
0 0 Pulse dialing
0 1 Not used
1 0 Tone dialing
1 1 Not used
Bits 4 to 7: Not used
6802E1: PSTN access number for loop start
Access number Hex value to program (BCD)
0 F0
Ø Ø
9 F9
00 00
Ø Ø
99 99
6802E2
Bit 0: Transmission disabled
0: Tx and Rx, 1: Rx only
Bit 1: Memory Lock reception
0: Enabled, 1: Disabled
Bits 2 to 7: Not used
6802E8 to 6802EA(H) - PSTN-2 line settings
6802F8 to 6802EA(H) - ISDN line settings
680300(H) - ID code (low - Hex)
680301(H) - ID code (high - Hex)
680302(H) - Confidential ID (low - BCD)
680303(H) - Confidential ID (high - BCD)
680304(H) - Memory Lock ID (low - BCD)
680305(H) - Memory Lock ID (high - BCD)