manualshive.com logo in svg

Gestetner G060, Service Manual

Share
Download
Gestetner G060 Service Manual Download Page 877

G

082

SPECIFICATIONS

SM

7-5

G082

2. SOFTWARE ACCESSORIES

The printer drivers and utility software are provided on one CD-ROM. An auto-run
installer allows you to select which components to install.

2.1 PRINTER DRIVERS

Printer

Language

Windows

95/98/ME

Windows NT4.0

Windows

2000/XP

Macintosh

PCL 5c

Yes

Yes

Yes

No

PS3

Yes

Yes

Yes

Yes

NOTE:

1) The printer drivers for Windows NT 4.0 are only for the Intel x86

platform. There is no Windows NT 4.0 printer driver for the PowerPC,
Alpha, or MIPS platforms.

2) The PS drivers are all genuine AdobePS drivers, except for Windows

2000, which uses Microsoft PS. A PPD file for each operating system is
provided with the driver.

3) The PS driver for Macintosh supports Mac OS 8.6 or later versions.

2.2 UTILITY SOFTWARE

Software

Description

SmartNetMonitor for Admin
(Win9x/Me, 2000, NT4.0, XP)

A printer management utility for network administrators.

SmartNetMonitor for Client
(Win9x/Me, 2000, NT4.0, XP)

•

  A printer management utility for client users.

•

  A utility for peer-to-peer printing over TCP/IP network.

ColorWise Pro Tools
(Windows/Macintosh)

This is a color management tool set for the Fiery 3850C. It is
composed of the following modules:

•

 Calibrator

•

 Color 

Editor

•

 Profile 

Manager

•

 Color 

Setup

NOTE:

1) For ColorWise Pro Tools, Densitometer (X-Rite DTP32/X-Rite DTP41) is

compatible.

Summary of Contents for G060



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands