Gestetner G060, Service Manual

Page: 776 / 1106

BIT SWITCHES
G307 3-52 SM
G3-2 Switch 0B SP No. 1-106-012
No FUNCTION COMMENTS
0 Protocol requirements: Europe
0: Disabled
1: Enabled
1 Protocol requirements: Spain
0: Disabled
1: Enabled
2 Protocol requirements:
Germany
0: Disabled
1: Enabled
3 Protocol requirements: France
0: Disabled
1: Enabled
4
PTT requirements: Germany
0: Disabled
1: Enabled
5 PTT requirements: France
0: Disabled
1: Enabled
The machine does not automatically reset these bits
for each country after a country code (System
Switch 0F) is programmed.
Change the required bits manually at installation.
6 Not used Do not change the settings.
7 Not used Do not change the settings.
G3-2 Switch 0C SP No. 1-106-013
No FUNCTION COMMENTS
0
1 Pulse dialing method
Bit 1 Bit 0
Setting
0 0 Normal(P=N)
0 1 Oslo (P=10 - N)
1 0 Sweden
(N+1)
1 1 Not used
P = Number of pulses sent out, N = Number dialed.
2-7 Not used Do not change the settings.
G3-2 Switch 0D - Not used (do not change the settings)
G3-2 Switch 0E - Not used (do not change the settings)
G3-2 Switch 0F - Not used (do not change the settings)