Gestetner G060, Service Manual

Page: 470 / 1106

REPLACEMENT
G570 3-22 SM
3.4.11 REQUIRED ACTIONS WHEN REPLACING ITEMS
ITEMS BEFORE REPLACING AFTER REPLACING
Scanner unit None 1. Adjust the registration for the
scanner and ARDF.
2. Do ACC for the copier application.
3. Do ACC for the printer application.
Printer mainframe None 1. Do ACC for the copier application.
2. Do ACC for the printer application.
NVRAM expansion
board on the
controller 1. Print out the SMC report.
2. Export the User Codes. 1. Execute SP5-801-3.
2. Execute SP5-801-9.
3. Execute SP5-801-10.
4. Execute SP5-801-12.
5. Reset the system settings.
6. Enter the SP and UP mode values
from the SMC report.
7. Import the User Codes.
8. Do ACC for the copier application.
9. Do ACC for the printer application.
NVRAM on the
controller Print out the SMC report. 1. Enter the SP and UP mode values
from the SMC report.
2. Do ACC for the copier application.
3. Do ACC for the printer application.
4. Reset the total counter to 0 if meter
charge mode is enabled.
Controller without
NVRAM None None
NVRAM on the
BCU Print out the SMC report. 1. Enter the machine’s device number
and destination code.
2. Reset the settings for meter charge.
3. Enter the SP and UP mode values
from the SMC report.
4. Execute the process control self-
check.
5. Do ACC for the copier application.
6. Do ACC for the printer application.
BCU without
NVRAM None None