Gestetner G060, Service Manual

Page: 587 / 1106

Copie
r
F
eat
u
re
E
x
pa
nde
r
G
570
COPY SP MODE
SM 5-49 G570
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
23 Interrupt 2 Performs the line position adjustment when the
number of prints reaches the number specified in
this SP mode regardless of the temperature
change.
[ 0 to 350 / 200 / 50 prints/step ]
0: Disable 993
24 Mscan Lgth Det
*
BCU
Performs the main scan length detection when the
polygon motor has operated consecutively for the
time specified in this SP mode.
[ 100 to 990 / 200 / 50 s/step ]
[Unit Detection ON/OFF] Maintenance Unit Detection ON/OFF
1 Dev. Unit/PCU *
#
BCU
Enables or disables PCU and development unit
detection.
[ 0 or 1 / 0 / - ] Alphanumeric
0: Enable
1: Disable
NOTE: If this mode is disabled, new unit detection
also does not function. Use this mode as a
temporary measure, only when the micro-
switches are defective.
994
2 Oil Supply Unit *
#
BCU
This is for the oil supply unit only, and not the
fusing unit
[ 0 or 1 / 0 / - ] Alphanumeric
0: Enable
1: Disable
NOTE: Use this mode as a temporary measure,
only when the unit detection mechanism is
defective.
[Test Pattern]
997
1 Tray Selection Selects the tray for making a test print.
[ 0 to 4 / 1 / 1/step ]
0: By-pass Table
1: Tray 1
2: Tray 2 3: Tray 3
4: Tray 4
NOTE: The machine makes a test pattern on the
paper size loaded in the selected paper
tray.