GE Multilin W650, Instruction Manual

Page: 18 / 622

1-8 W650 Wind Generator Protection System GEK-113032A
1.2 OVERVIEW 1 GETTING STARTED
1
Figure 1–6: 650 CONCEPT BLOCK DIAGRAM
Contact Inputs/Outputs are signals associated to the physical input/output contacts in the relay
CT and VT inputs are signals coming from the inputs of current and voltage transformers, used for monitoring the power
system signals.
CAN Bus Inputs/Outputs : are signals associated to physical input/output contacts from independent modules connected
to the 650 unit via a CAN Bus.
PLC : Programmable Logic Controller. Control module that enables the unit configuration (assignment of inputs/outputs)
and the implementation of logic circuits.
Protection Elements : Relay protection elements, for example: Overcurrent, overvoltage, etc.
Remote inputs and outputs provide a means of sharing digital point state information between remote devices using IEC
61850 GSSE messages.
Analog Inputs are signals associated with transducers.