manualshive.com logo in svg

GE Multilin W650, Instruction Manual, Page: 259 / 622

Share
Download
GE Multilin W650 Instruction Manual Download Page 259

GEK-113032A

W650 Wind Generator Protection System

5-119

5 SETTINGS

5.8 RELAY CONFIGURATION

5

Figure 5–42: SWITCHGEAR CONFIGURATION

Note:

 when a switchgear device is only monitored (open init and closing init signals are not used), it is not possible to

distinguish between the fail to open or fail to close time, the time used to give an error 00 or 11 signal is the maximum of the
opening and closing time configured for that switchgear.

5.8.8 HMI (HUMAN-MACHINE INTERFACE)

This menu shows a scenario to draw a simplified one-line diagram of a bay in a feeder, line, transformer, etc. The menu
includes a library for power elements, metering elements, text and drawings.

For using the drawing toolbar elements, we must select the desired element with the mouse and then click on the yellow
area. The selected element will be moved to the screen on the selected spot (see Figure 5–43:).

The graphic display can be used to configured switchgear elements, operations, metering values, date and time, etc. The
configured values will always be updated with the real status of the relay.

This functionality is only applicable to W650 elements with graphical display (240x128pixels), and not for elements with
alphanumerical display (20x4 characters).

Figure 5–43: HMI CONFIGURATION

Summary of Contents for Multilin W650















































































































































































































































































































































































































































































































































































































































Reviews:

No comments