GE AKTA avant, User Manual

Page: 299 / 538

Action Step
In the Phase Properties tab of the Column CIP phase: 4
•
Click Add Step to add a step.
•
Select the step and click Remove Step to remove a step.
•
To enter a value, select the cell and enter or select a new value.
In the Phase Properties tab of the Column CIP phase, click the Get Suggested
Steps button to get a suggested procedure for the selected column type.
Note that this function is not available for all column types. 5
Result: Suggested cleaning steps for the selected column type are displayed.
If several cleaning solutions are used, change settings for Inlet A and/or Inlet
B. Select one inlet for each solution. If Inlet B is used, remember to edit the
values in the %B column. 6
ÄKTA avant User Manual 29035184 AE 299
7 Maintenance
7.6 Maintenance when required
7.6.3 Perform Column CIP