GE HEALTHCARE MAC 2000, Operator'S Manual

Page: 171 / 226

System Configuration
• Date of Test
• Export Date
• Secondary ID
5. Press Save and return to the System Configuration window.
Retrieving Your Password
If the system is set up for High Security Mode and you forget your password, use the
following procedure to access the system:
1. Contact GE Healthcare Technical Support and provide the serial number of
the device you want to access.
GE Healthcare Technical Support generates a temporary, device-specific name
and password that you can use for 24 hours.
2. Log in to the system with the user ID MACService and the password provided
by GE Healthcare Technical Support.
NOTE:
If the keypad on the device does not include the letters for the MACService
user ID, type 6227378423 for the user ID.
3. Immediately after logging into the system, verify the name and password for
your device.
4. Record this information and store it in a secure location for future reference.
Exporting the Audit Trail
The Audit Trail Export function copies the system audit trail in XML format to an SD
card and then clears the audit trail on the system. If a previous audit trail exists on the
SD card, it IS overwritten automatically by the new audit trail.
GE Healthcare recommends exporting the audit trail weekly to long term storage to
meet archive requirements. If the audit trail is not exported regularly, it consumes
storage space and reduces the number of ECGs that you can store on the device
To export an audit trail, the following conditions must be met:
• High Security Mode must be enabled.
To enable High Security Mode , see “Basic Setup” on page 113 .
• Audit Trail must be enabled.
To enable Audit Trail , see “Basic Setup” on page 113 .
• You must have Edit Setup and Delete Records permissions set.
To set permissions for Edit Setup and Delete Records, see “User Setup” on page 161 .
2053535-002K MAC™ 2000 171