GE HEALTHCARE MAC 2000, Operator'S Manual

Page: 74 / 226

Recording a Resting ECG
ECG Options–First Row (cont'd.)
Option Description
150 Hz .
NOTE:
The initial
measurement
displayed is
set in
System
Configuration
> Resting ECG
Setup .
Eliminates noise in the waveform by restricting which frequencies
are included. Frequencies are measured in Hertz (Hz) and include
the following options:
• 20 Hz
• 40 Hz
• 100 Hz
• 150 Hz
Selecting a frequency eliminates signals that exceed that
frequency. The smaller the frequency selected, the more signal is
filtered out. For example, a filter of 40 Hz displays only signals at
40 Hz or less; signals greater than 40 Hz are ignored.
Changing the measurement here does not change the
measurement set in
System Configuration .
Pace Enhance Improves the readability of pacemaker ECGs. Options are On and
Off .
More
Toggles between the first row of options (previous) and the second
row of options (following).
ECG Options–Second Row
Option Description
Printer Leads
NOTE:
The initial
measurement
displayed is
set in
System
Configuration
> Resting ECG
Setup .
Selects which leads to include in the printout. Options are:
• First 6
• Second 6
• Rhythm 6
• 12
Use this option only when conducting rhythm ECGs. For more
information, see
“Generating a Rhythm Report (Manual Recording)
” on page 81 .
Changing the measurement here does not change the
measurement set in
System Configuration .
ADS Toggles the anti-drift system ( ADS ) on and off . ADS helps reduce
baseline drift.
Full Disclosure Press to start generating a Full Disclosure ECG report.
See “Full Disclosure” on page 77 for detailed instruction.
Main Menu
Exits Resting ECG and returns you to the Main Menu.
More
Toggles between the first row of options (previous) and the second
row of options (following).
74 MAC™ 2000 2053535-002K