GE HEALTHCARE MAC 2000, Operator'S Manual

Page: 85 / 226

Arrhythmia Mode Recording
Arrhythmia Options- first row (cont'd.)
Option Description
20 Hz
NOTE:
The initial
measurement
displayed is
set in
System
Configuration >
Arrhythmia Setup .
Eliminates noise in the waveform by restricting which
frequencies are included. Frequencies are measured in Hertz
(Hz) and include the following options:
• 20 Hz
• 40 Hz
• 100 Hz
• 150 Hz
Selecting a frequency eliminates signals that exceed that
frequency. The smaller the frequency selected, the more signal
is filtered out. For example, a filter of 40 Hz displays only signals
at 40 Hz or less; signals greater than 40 Hz are ignored.
Changing the measurement here does not change the
measurement set in
System Configuration .
More
Toggles between the first row of options (previous) and the
second row of options (following).
Arrhythmia Options second row
Option Description
Pace Enhance Improves the readability of pacemaker ECGs. Options are On
and Off .
Patient Data
Opens the Patient Data Entry window.
This tab is available only if you did not complete the Portent
Data Entry window earlier.
Main Menu
Exits the Arrhythmia function and returns to the Main Menu .
More
Toggles between the first row of options and the second row
of options
Printing
You can manually generate an arrhythmia printout in a table format, an episode
format, or a summary format.
Printing an Arrhythmia Report
Use the following procedure to print an Arrhythmia report.
1. Select the type of Arrhythmia report you want to print and press the appropriate
function key.
• To print the summary report, press Print Summary .
• To print the table report, press Print Table .
• To print the arrhythmia episodes, press Print Episodes .
2053535-002K MAC™ 2000 85