GE HEALTHCARE MAC 2000 Operator'S Manual Download Page 108

Page: 108 / 226

Managing Internal Storage

Use the

trimpad

to select the record you want to edit.

NOTE:

You cannot edit the patient data for records that were imported to internal
storage. Imported records have a

Sent

status of

Recv

Press

Edit

The

Enter Patient Data

window opens.

Edit the information as appropriate.

For instructions on editing patient information, see

“Entering Patient

Information” on page 57

After the information is updated, press

Save

The updated information is saved, and you return to the

File Manager

window.

NOTE:

If you only edit demographic information, the record is still transmitted to the
MUSE system as an unconfirmed record.

Previewing Records

Use the following instructions to preview recorded patient data:

From the

Main Menu

, press

File Manager

The

File Manager

window opens.

Press

Select

and use the

trimpad

to select the record you want to preview.

Press

Preview

A window opens with the record for you to review.

After reviewing the record, press

Return

and return to the

File Manager

108

MAC™ 2000

2053535-002K

Summary of Contents for MAC 2000


































































































































































































































Search results

Summary of Contents for MAC 2000

Reviews:

Related manuals for MAC 2000

Brands by name

Popular brands

GE HEALTHCARE MAC 2000, Operator'S Manual

Search results

Summary of Contents for MAC 2000

Reviews:

Related manuals for MAC 2000

Brands by name

Popular brands