GE HEALTHCARE MAC 2000, Operator'S Manual

Page: 121 / 226

System Configuration
Resting ECG Setup Fields–Page 2
Field
Comment
Printer Leads Identifies the default set of leads to use for printing.
The values are:
• First 6
• Second 6
• Rhythm 6
• 12
Start rhythm report on new page Determines whether the rhythm report prints on a
separate page.
Pace Enhancement Increases the readability of pacemaker ECG either
by augmenting small pace pulses or by truncating
large pace pulses. If enabled, pace enhancement is
done in two steps:
1. Add a marker (1.5 mV amplitude, 6 ms duration)
to the electrode signal.
2. Limit the sum to 0.5 mV in the lead signal.
Preview before Analysis Determines waveform preview options. Values
include:
• No
Waveforms are never previewed.
• Always
Waveforms are always previewed.
• Yellow electrodes
Waveforms are previewed when the Hookup
Advisor indicator shows a yellow or red electrode.
• Red electrodes
Waveforms are previewed when the Hookup
Advisor indicator shows a red electrode.
For additional information, see “Hookup Advisor” on
page 70 .
Reanalysis
Enables/disables the reanalysis feature, which allows
you to adjust the following ECG measurements:
• P Duration
• PR Interval
• QRS Duration
• QT Interval
This is available only if Audit Trail is disabled and one
of the following options is activated: ME12 , MEHR ,
MI12 , or MIHR .
For more information on activating options, see
“Options Setup” on page 165 .
2053535-002K MAC™ 2000 121