GE HEALTHCARE MAC 2000 Operator'S Manual Download Page 177

Page: 177 / 226

Maintenance

Adjusting the Tray for Paper Size

Adjusting the Tray for 8.5 x 11 inches or A4

Use the following procedure to adjust the tray for the correct paper size if you are
using letter (8.5 x 11 inches) or A4 paper.

Turn the device over so the bottom of the device is facing you.

Loosen the length and width fasteners (2 and 4) situated close to the paper
spacers.

Slide the spacers (1 and 3) to the appropriate position for the paper size that
you are using.

Tighten the screws (2 and 4) in the selected position.

Turn the device to the upright position and press the push button to open the
printer door (6).

If you are using letter size (8.5 x 11 inches), remove the paper spacer post print (7).

NOTE:

If you are using A4 paper, the paper spacer post print should be snapped
on. By default, the tray is set to A4 paper and therefore the paper spacer
post print is in place.

2053535-002K

MAC™ 2000

177

Summary of Contents for MAC 2000


































































































































































































































Search results

Summary of Contents for MAC 2000

Reviews:

Related manuals for MAC 2000

Brands by name

Popular brands

GE HEALTHCARE MAC 2000, Operator'S Manual

Search results

Summary of Contents for MAC 2000

Reviews:

Related manuals for MAC 2000

Brands by name

Popular brands