GE HEALTHCARE MAC 2000, Operator'S Manual

Page: 184 / 226

Troubleshooting
Frequently Asked Questions (FAQ)
This section addresses frequently asked questions concerning maintenance, system
setup, and clinical topics.
Question Procedure
How do I save changes I have made to the
System Configuration? Refer to “Export Setup” on page 165 .
How do I restore system setups from the SD
card? Refer to “Import Setup” on page 164
How do I obtain a printed record of the
System configuration file? Refer to “Print Setup Report” on page 154 .
I need to reactivate the options on my
system. Where can I find the Option Codes? The codes are listed on the last page of your
printed setup report. Refer to
“Print Setup
Report” on page 154 .
They are also found on a label next to the
battery compartment.
Why won’t any of the ECGs I perform save
to the SD card? Refer to “Exporting Records” on page 111 .
Should I clean the device? Refer to “Maintenance” . “Equipment Cleaning
and Storage” on page 173 .
What is the capacity of the battery? Refer to the Battery information in “Product
Overview” . “Hardware Specifications” on
page 37 .
I need to provide the address of the device to
the network administrator to enable the LAN
communication option. How do I obtain the
address?
After the LANM/LANC option is enabled and
the network cable connected, you can obtain
the IP address from
“Communication Setup”
on page 140 .
Equipment Problems
The following issues are discussed in this section:
• “System Does Not Power Up” on page 184
• “ECG Data Contains Noise” on page 185
• “External Stress Equipment does not Move” on page 185
• “Paper Jams” on page 186
System Does Not Power Up
If the system does not power up, do the following:
• Verify the device is turned on.
If it is not, turn the device on. Refer to “Turning on the System” on page 50 for
instructions.
• Verify the battery is installed and charged.
Refer to “System Errors” on page 190 for instructions on verifying whether the
battery is installed and charged.
184 MAC™ 2000 2053535-002K