GE HEALTHCARE MAC 2000, Operator'S Manual

Page: 25 / 226

Introduction
Installation and Connection
If the installation of this equipment in the USA will use 240V rather than 120V, the
source must be a center-tapped, 240V, single-phase circuit.
Contact GE Healthcare for information before connecting any devices to this
equipment that are not recommended in this manual or the supplies and accessories
reference guide for this system.
Training
This manual is intended as a supplement to, not a substitute for, thorough product
training. If you have not received training on the use of the system, you should request
training assistance from GE Healthcare.
To see available training, go to the GE Healthcare training Web
site (
www.gehealthcare.com/training ). Select Education>Product
Education-Technical>Diagnostic Cardiology .
For more self-paced course offerings, tools, and reference guides you
may find useful, please visit the GE Healthcare Education Store at
www.gehealthcare.com/educationstore .
Equipment Identification
Every GE Healthcare product has a product label that identifies the product name,
part number, manufacturing information, and unique serial number. This information
is required when contacting GE Healthcare for support.
Product Label
The product label is laid out in the following format. Depending on the product, the
label may vary slightly in format, but it contains the same information.
Product Label Format
Item
Description
1
Product description
2
Product part number
3
Device serial number (See “Serial Number Format” on page 25 for more information.)
4
Product bar code
5
Date of manufacture in YYYY-MM format
Serial Number Format
Each device has a serial number that uniquely identifies it and provides important
information. You need the product code and the entire serial number before servicing
2053535-002K MAC™ 2000 25