GE HEALTHCARE MAC 2000, Operator'S Manual

Page: 161 / 226

System Configuration
Barcode Scanner Setup
Field
Comments
Auto Configure Automatically configures the barcode reader. When you click
this link, you are prompted to scan a configuration barcode
created by the site’s IT department.
For more information on creating the barcodes, see “Creating
Barcodes ” on page 193 .
Total number of bytes Identifies the total number of bytes on the barcode.
Offset Identifies the position of the initial character of the
corresponding field.
Length Identifies the number of characters for the corresponding field.
User Setup
The User Setup function allows you to define the following:
• User names
• User identification
• User roles
• User privileges
Users entered in setup can be selected for system defaults and patient information.
If
High Security Mode is enabled, anyone who uses the system must be set up as a
user with a user ID, a password, and privileges to log on to the system. For more
information on setting system defaults and enabling
High Security Mode , see “Basic
Setup” on page 113 .
To access User Setup , on the Main Menu press System Configuration > More > User
Setup .
When you run User Setup , the Edit User Lists window opens to offer four choices:
• Ordering Physicians
• Referring Physicians
2053535-002K MAC™ 2000 161