Garmin SEAT Portable System User Manual Download

Page: 124 / 176

User’s manual SEAT Portable System

- 124 -

Car info

►

(Charging): The charging of the battery is activated.

►

Week-day: The week-day which was set when defining the

departure time.

►

Time: The time which was set when defining the departure time.

If there are active error messages for the charging of the battery or for

the air conditioning, Charging messages will be shown here.

►

Tap on the

(List) button to show the message(s).

Opens the

ETTINGS

window. These settings are basic settings which

apply for all charging locations (see "Settings" on page 126).

Configuring a charging location

You can define and save up to 10 charging stations. Saved charging

stations can be assigned to a departure time and be subsequently

edited, renamed or deleted. One charging location is already defined,

but its settings can be changed.

1. In the

MANAGER

window tap on the

(List) button to the right of

the Charging stations entry.
The

HARGING STATIONS

list opens.

2. Tap on Add.
3. Enter a name for the charging location.

4. Tap on

(Save).

The

HARGING STATION

window opens. There you can make the

following settings for the new charging location:

►

Air conditioning: Activate the checkbox

alongside this

setting if you want the temperature in the vehicle to have

already reached a certain value at the time of departure. To

define the temperature, proceed as described in "Internal aircon

temperature" on page 126 beschrieben.

►

Charging: Activate the

checkbox alongside this setting if

you want the vehicle's battery to be charged to a certain level

by the time of departure. The charging status corresponds to

the value of the Upper charge limit setting.

►

Upper charge limit: This setting is active only when the

Charging setting is activated. Here you can define how high you

want the battery charged by the time of departure. Tap on the

setting and select the required value (0 % - 100 %).

►

Current value: Here you can define the amperage which can be

used for the charging at the charging station. Tap on the setting

and select the correct value (5 A, 10 A, 13 A or 16 A).

Summary of Contents for SEAT Portable System

















































































































































































Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands

Garmin SEAT Portable System, User Manual

Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands