Garmin SEAT Portable System User Manual Download

Page: 145 / 176

User’s manual SEAT Portable System

Handsfree module

- 145 -

13.1.2

Pairing from the mobile phone

Note:

Please consult the mobile phone's manual if you are uncertain

about how to carry out the following steps on the mobile phone.

1. Make sure that the Bluetooth function is activated on both the

mobile phone and the navigation device. To perform the pairing

from the mobile phone, the functions Discoverable by others and

Others may connect must also be activated on the navigation

device (see "Configuring the hands-free module" on page 155).

2. Using your mobile phone, search for other Bluetooth devices.

The navigation device is detected as

Car Phone

3. Initiate a connection to the detected

Car Phone

device.

The mobile phone prompts you to enter a password.

4. Enter a password (1-16 digits).

The navigation device prompts you to enter a password.

5. Enter the same password in the Key box as on the mobile phone

and tap on OK.
The pairing is performed and a connection is set up between the

two devices. The connected device is indicated in the

RUSTED

DEVICES

list.

►

If the new device is a mobile phone, one of the two symbols will

appear to the right of its name in green colour depending on

whether it is connected as Phone 1 or as Phone 2.

►

When pairing with a modern smartphone it may not be

necessary to enter a password. Instead a number will appear

on the smartphone and on the navigation device. Check

whether the two numbers are identical. Then confirm on the two

devices.

13.1.3

Connecting to a device

In this case "connection" refers to any subsequent connections between

Bluetooth devices which have already been paired. No further password

entry is necessary when connecting.
1. Make sure that Bluetooth is activated on your navigation device.

►

M make sure that Bluetooth is activated on the mobile phone and

that the Discoverable by others and Others may connect settings

are activated.

Note:

The exact designation of these settings may vary from

manufacturer to manufacturer. For details please refer to the manual

issued for your mobile phone.

Summary of Contents for SEAT Portable System

















































































































































































Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands

Garmin SEAT Portable System, User Manual

Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands