Garmin SEAT Portable System User Manual Download

Page: 14 / 176

User’s manual SEAT Portable System

- 14 -

Before you begin

Removing the cradle

1. Press the button at the bottom of the cradle (see figure).
2. Holding the button pressed, take the cradle out of the opening.

Fitting the cover

1. Place the cover over the opening.
2. Press the cover fully into the opening.

2.4.2

Mounting the navigation device

Caution!

Be sure to refer to all the safety information in the chapter

"Important safety information" on page 11.

Removing the cover

In the middle of the dashboard is the opening for the cradle of the

navigation device.

►

Remove the cover from over the opening in the dashboard.

Fitting the cradle

1. Place the cradle, correctly aligned, over the opening provided for it.
2. Press the cradle into the opening until you hear and feel that it

latches in place.

Fitting the navigation device in the cradle

On the back of the navigation device you will see a circle with two

recesses.
1. Hang the navigation device by the upper recess on the upper lug of

the cradle.

2. Then press it towards the cradle so that it latches in place.

Summary of Contents for SEAT Portable System

















































































































































































Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands

Garmin SEAT Portable System, User Manual

Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands