Garmin SEAT Portable System User Manual Download

Page: 169 / 176

User’s manual SEAT Portable System

Appendix

- 169 -

Governing law.

The above terms and conditions shall be governed by

the laws of Kansas, without giving effect to (i) its conflict of laws

provisions or (ii) the United Nations Convention for Contracts for the

International Sale of Goods, which is explicitly excluded. You agree to

submit to the jurisdiction of Kansas for any and all disputes, claims and

actions arising from or in connection with the Data which may be

initiated by Garmin and/or its licensors, including their licensors and

suppliers.

Government end users.

If the End User is an agency, department or

other entity of the United States Government, or funded in whole or in

part by the U.S. Government, then use, duplication, reproduction,

release, modification, disclosure or transfer of the Product and

accompanying documentation is subject to restrictions as set forth in

DFARS 252.227-7014(a)(1) (JUN 1995) (DOD commercial computer

software definition), DFARS 27.7202-1 (DOD policy on commercial

computer software), FAR 52.227-19 (JUN 1987) (commercial computer

software clause for civilian agencies), DFARS 252.227-7015 (NOV

1995) (DOD technical data – commercial items clause); FAR 52.227-14

Alternates I, II and III (JUN 1987) (civilian agency technical data and

non-commercial computer software clause); and/or FAR 12.211 and

FAR 12.212 (commercial item acquisitions), as applicable. In case of

conflict between any of the FAR and DFARS provisions listed herein

and this Licence, the construction that provides greater limitations on

the Government’s rights shall control. The contractor/manufacturer is

Garmin International, Inc., 1200 East 151st Street, Olathe, KS 66062,

USA.
Garmin® is a trademark of Garmin Ltd. or its subsidiaries, registered in

the USA and other countries. These trademarks may not be used

without the express permission of Garmin.

16.3

Declaration of conformity

Garmin declares herewith that this product conforms with the essential

requirements and other relevant provisisions of the directive 1999/5/EC.
You will find the complete declaration of conformance at

www.garmin.com/pid

Summary of Contents for SEAT Portable System

















































































































































































Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands

Garmin SEAT Portable System, User Manual

Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands