Garmin SEAT Portable System User Manual Download

Page: 97 / 176

User’s manual SEAT Portable System

Useful functions

- 97 -

The indicated remaining range depends on the current consumption.

►

Tap on Cancel if you do not want to buy more fuel until later.

While navigation is in progress (map in Navigation mode)

1. Tap on Search if you want to drive to a petrol station now.

The

POI

S ON YOUR ROUTE

list opens. It shows the nearest petrol

stations along your route.

2. Tap on the name of the petrol station you want to drive to.

The petrol station will be inserted as an interim destination.

Navigation to this station will start. Navigation to the original

destination will be continued after you have bought more petrol.

No navigation in progress (map in Standard mode)

1. Tap on Search if you want to drive to a petrol station now.

The

POI

EARBY

window opens. It shows petrol stations in your

vicinity.

2. Tap on the name of the petrol station you want to drive to.

Navigation to the petrol station starts.

10.14 Optical parking system (OPS), Parking assistant

Note:

Parking assistance is available only when the corresponding

sensors are fitted to the vehicle. Some vehicles have sensors only at

the rear, others can divide the space in front of or behind the vehicle

into different numbers of zones. Parking assistance varies from vehicle

to vehicle and can differ therefore from the description used in this

chapter. However, it always works in the way described here.

Summary of Contents for SEAT Portable System

















































































































































































Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands

Garmin SEAT Portable System, User Manual

Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands