Garmin SEAT Portable System User Manual Download

Page: 23 / 176

User’s manual SEAT Portable System

Operating the navigation system

- 23 -

GPS

The

GPS

symbol can show the following GPS reception states:

No GPS

(No symbol): The built-in GPS receiver is not operational.

on page 10).

No signal

: Data is being received from less than three satellites.

Position cannot be calculated.

GPS ready

: Data is being received from at least 3 satellites. Position

can be calculated.

For details of the GPS status refer to chapter "GPS status, saving the

current location" on page 94.

Track

The (

Record track

) symbol indicates that a track is being recorded

at this moment.

For more information about tracks refer to chapter "Tracks" on page 84.

Compass

The

Compass

symbol is available only in the map view. It shows you in

which direction you are currently moving. It can indicate the following

points of the compass: N, NE, E, SE, S, SW, W, NW.

Showing and hiding the Compass symbol

You can activate and deactivate the

Compass

symbol so that it is

shown or hidden.

►

In the

AVIGATION

window tap on More functions > Settings >

Navigation.

►

Scroll with the

(To the left) and

(To the right) buttons

until you see the Display compass setting.
The currently valid setting value is highlighted (red).

►

Tap on the

(Toggle) button to alternate between the setting

values.

►

Tap on OK.

Summary of Contents for SEAT Portable System

















































































































































































Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands

Garmin SEAT Portable System, User Manual

Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands