Garmin SEAT Portable System User Manual Download

Page: 45 / 176

User’s manual SEAT Portable System

Navigation

- 45 -

7.2.9

Last destinations

The last 12 destinations to which you have navigated are saved by the

navigation system in the

AST DESTINATIONS

list.

1. In the

AVIGATION

window, tap on My destinations > Last

destinations.

2. Tap on the destination to which you want to navigate.

The

ETAILED INFORMATION ABOUT THE DESTINATION

window opens.

Indicated on the Activate MyRoutes button is whether several route

suggestions are to be calculated (Yes) or not (No).

►

Tap on Activate MyRoutes in order to change the setting.

3. Tap on Start navigation.

- or -
Tap on Parking in order to search for and navigate to a car park

near your destination.

Tap on Parking Charging > Charging near the destination in

order to search for a charging station near the destination.
The map opens in

Preview

mode. The destination is indicated on

the map.

For detailed information on how to start navigation, please refer to the

chapter "Route preview" on page 47. Please read on there.

7.2.10

Imported addresses from the phone book

The phone book of a mobile phone with which you are connected can

be imported into the navigation device. Addresses from the phone book

are then found in the

MPORTED ADDRESSES FROM THE PHONE BOOK

list.

1. In the

AVIGATION

window tap on My destinations > Imported

addresses > From the phone book.

2. Select the contact you want from the phone book.
3. Tap on the address to which you want to navigate.

The

ETAILED INFORMATION ABOUT THE DESTINATION

window opens.

Indicated on the Activate MyRoutes button is whether several route

suggestions are to be calculated (Yes) or not (No).

►

Tap on Activate MyRoutes in order to change the setting.

4. Tap on Start navigation.

- or -
Tap on Parking in order to search for a car park near your

destination.

Summary of Contents for SEAT Portable System

















































































































































































Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands

Garmin SEAT Portable System, User Manual

Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands