Garmin SEAT Portable System User Manual Download

Page: 59 / 176

User’s manual SEAT Portable System

Options, more functions

- 59 -

Options, more functions

From some windows you can reach more functions.
1. In the

AVIGATION

window tap on More functions.

- or -
Tap on Options.

2. Tap on the option you would like to use.

►

If you would like to quit the options list without selecting an option,

tap again on More functions or Options.

2D/3D: Changes between 2D and 3D mode. The symbol indicates the current

mode.

Add to route: Opens the route planning. The address specified will be added as

a route point (see "Tracks and multi-leg routes" on page 52).

Block: Opens a window in which you can block a section of the route lying

ahead in order to calculate a route which avoids this section, e.g. if you

have heard on the radio of a traffic jam relating to this section

(see "Block" on page 94).

Day/Night: Changes between "Day" and "Night" screen modes. The symbol

indicates the current mode.

Delete all: Deletes all destinations in the list (

AST DESTINATIONS

list or

AVOURITES

list, depending on where you opened the options). The list

is then empty. A dialog window prompts you to confirm deletion.

Delete destination: Deletes the selected destination from the list (

AST

DESTINATIONS

AVOURITES

, depending on where you opened the

options). A dialog window prompts you to confirm deletion.

Direct help: Opens a window in which you can find in quick and uncomplicated

manner the addresses and phone numbers of offices in your direct

vicinity that can be useful in emergencies (see "Direct help" on

page 93).

Factory settings: Resets all settings to the as-delivered state. Routes and saved

destinations are deleted. The software is re-started and behaves as if

started for the first time after being purchased.

GPS status: Opens the

GPS

STATUS

window. Here you can see details

regarding GPS reception. You can also save the data of the current

location (see "GPS status, saving the current location" on page 94).

Summary of Contents for SEAT Portable System

















































































































































































Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands

Garmin SEAT Portable System, User Manual

Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands