Garmin SEAT Portable System User Manual Download

Page: 13 / 176

User’s manual SEAT Portable System

Before you begin

- 13 -

Note:

Create a backup of the data which exist in the internal memory of

your navigation device.
This is very easy to do with the

Fresh

software which can be

downloaded free of charge from our website

www.garmin.com/pid

2.4

Mounting/removing the navigation system

The vehicle is already prepared for the navigation system to be

installed. In the middle of the dashboard is a slot for the cradle of the

navigation device. Power is supplied to the device through this cradle.

Radio traffic information is received via the antenna of the car radio.

The navigation device can be used to control the car radio, and it

receives vehicle data such as consumption, amount of fuel in the tank,

speed, etc.

2.4.1

Removing the navigation device

When you receive your new vehicle, the navigation device is already

installed. To prevent theft we recommend that you do not leave the

navigation system mounted in the vehicle when you park.

Removing the navigation device from the cradle

1. Press the button at the top of the cradle (see figure).
2. Pull the bottom edge of the navigation device away from the cradle

slightly.

3. Lift the device up and out.

Summary of Contents for SEAT Portable System

















































































































































































Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands

Garmin SEAT Portable System, User Manual

Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands