Garmin SEAT Portable System User Manual Download

Page: 76 / 176

User’s manual SEAT Portable System

- 76 -

Working with the map

9.6

Range 360 map view

The

Range 360

map view shows the possible radius of action on the

map. The current battery charge and the level of consumption are

considered. The area lying within range is highlighted. The display is

continuously updated during travel.

Note:

The range is shown only when the following conditions are

fulfilled:

►

The navigation device is correctly inserted in its cradle.

►

The vehicle ignition is on.

►

GPS reception is good enough for positioning purposes.

9.6.1

Showing the range

►

In the

AVIGATION

window, tap on More functions > Range 360.

There are three types of view to choose from.

The range view can be configured. For more details refer to the chapter

"Configuring the Range 360 map view" on page 78.

One way

The highlighted area shows the maximum distance you can drive from

your current position.

Summary of Contents for SEAT Portable System

















































































































































































Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands

Garmin SEAT Portable System, User Manual

Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands