Garmin SEAT Portable System User Manual Download

Page: 103 / 176

User’s manual SEAT Portable System

Useful functions

- 103 -

►

Tap on No if there is no charging possibility at this favourite.

►

Tap on Normal charging station if you can charge you vehicle at

normal speed at this favourite's address. This is possible at many

standard household power sockets and at most public charging

stations with alternating current (AC).
The favourite will be saved as a charging station. In the

AVOURITES

list it will be marked with the symbol

(Normal charging station).

►

Tap on High-speed charging station if you can charge your vehicle

at high speed at this favourite's address. This is usually possible at

charging stations with direct current (DC) and a combination

connection.
The favourite will be saved as a charging station. In the

AVOURITES

list it will be marked with the symbol

(High-speed charging

station).

4. Tap on OK.

Note:

The home address is always marked by a house symbol, even

when it is saved as a charging station.

10.17

Special functions for CNG vehicles

Note:

The functions which are described here consider only the driving

range possible with the CNG tank. The contents of the petrol tank are

not considered when calculating the range.

10.17.1 Multi-Stop route

Note:

This function is available only when

►

the navigation device is correctly inserted in its cradle.

►

the vehicle ignition is on.

►

GPS reception is good enough to determine the current position.

Multi-Stop routes are routes with interim stops at fuelling stations with

CNG pumps.
A Multi-Stop route can be calculated in the following circumstances:

►

With the current range of the CNG tank you cannot reach the

destination.

►

With the current range of the CNG tank you can reach the

destination but then you cannot reach any fuelling station with a

CNG pump.

Summary of Contents for SEAT Portable System

















































































































































































Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands

Garmin SEAT Portable System, User Manual

Search results

Summary of Contents for SEAT Portable System

Reviews:

Related manuals for SEAT Portable System

Brands by name

Popular brands