67
4. Operation of systems and equipment
L o c k i n g - s e n s i t i v e w i n d o w c l o s i n g
function *
If you close and lock the doors without closing
the windows (door locking by remote control
key, intelligent active locking, or Bluetooth
locking* when you leaving the vehicle), the
system will automatically close the windows to
prevent the vehicle from being damaged. This
function can be activated or deactivated via
“Settings → Body Accessories → Door/window
Lock → Locking-sensitive Window Closing” in
the AV system. If the window fails to be closed
automatically due to abnormal conditions such
as activation of anti-pinch function, the horn
will sound 4 times to remind the user that the
window closing fails.
CAUTION
The locking-sensitive window closing
function is effective only when the battery
level and other relevant parts are normal.
Do not leave the vehicle until it is confirmed
that the windows are fully closed.
Automatic window calibration *
If the window cannot be automatically raised
due to external reasons, the window will be
lowered to the bottom for automatic calibration,
and then the window will be automatically
raised.
CAUTION
Under special circumstances, an individual
window may not be automatically lifted, and
in this case, users are required to manually
lift windows for calibration.
Window open warning *
When the ENGINE START/STOP button is
turned to the “OFF” position with any window
open, if you open the driver’s door, the system
will send a buzzer sound and the instrument
cluster display will display the message
“Window open”.
Initialization of anti-pinch function *
If the express-up function is not available, or
the anti-pinch function fails, or the initialization
becomes invalid automatically because the
anti-pinch function is triggered multiple times
in a short period of time, the power window
needs to be initialized again.
1. Pull up the power window control button,
and then the window is lifted in steps until
it is completely closed.
2. A f t e r t h e w i n d o w i s c o m p l e t e l y
closed, continue to pull up the power
window control button for about 2 s for
initialization.
3. After the initialization of the corresponding
window is completed, lower the window to
the bottom and press and hold the power
window control button for about 2 s to
make the window reach the hard stop.
4. Lift the power window control button and
check whether the express-up function is
available.
