245
8. Accident handling
CAUTION
● When connecting the battery of two
vehicles, the positive terminals must be
connected first, and then the negative
terminals.
● Properly arrange the jumper cable to
avoid contact between the cable and the
moving parts of the engine.
WARNING
● Ensure that the headlamps are off
before removing the jumper cable.
● Tu r n o n t h e b l o w e r a n d r e a r
windshield heater of the vehicle with
the depleted battery to reduce the
voltage peak generated when the
cable is removed.
● Remove the jumper cable in the
reverse order when the engine is
running.
WARNING
Improper use of jumper cable may cause
battery explosion and serious injury to
personnel.
● The voltage of the power supply
battery must be the same as that of
the depleted battery, and the capacity
of the two batteries must be the same
as much as possible. Otherwise, it
may cause an explosion.
● Do not expose the battery to open
fire, and beware of explosion.
● Do not connect the negative cable
directly to the negative terminal of
the battery without power. There
shall be no static electricity near the
battery, otherwise, the combustible
gas generated by the battery may be
ignited by sparks, causing explosion.
● Do not connect the negative cable to
the fuel system component or brake
pipeline, and do not bend over to
the battery during operation to avoid
being burned by acid.
WARNING
The jumper cable shall be correctly
connected to the positive and negative
terminals of the battery according to
the above instructions, and shall not
be connected to other positions of
the battery. Otherwise, the fuse may
be ablated or part of the vehicle may
not work, and our company shall not
assume any responsibility for this.
