GAC MOTOR Trumpchi, Owner'S Manual

Page: 86 / 255

80
4. Operation of systems and equipment
When the ENGINE START/STOP button is in
the “ON” position, the wiper combination switch
can be operated as follows:
① MIST: inching
② OFF: front windshield wiper off
③
AUTO: automatic wiping *
- INT: intermittent wiping*
④ LO: wiping at low speed
⑤
HI: wiping at high speed
⑥ Front windshield washer system on
⑦ Adjusting knob:
- Adjust the sensitivity of automatic wiping
(AUTO)*
- Adjusting the intermittent wiping (INT)
interval*
MIST: inching
- Turn the wiper combination switch from
the initial position to the limit ① MIST
position and then release it. The wiper
combination switch will return to the initial
position, and the front wiper motor will
stop moving after wiping once.
- If the wiper combination switch is toggled
from the initial position to the limit
①
MIST position and then not released, the
front wiper motor will always work.
OFF: wiper off
- Toggle the wiper combination switch to
the limit ② OFF position, so that the front
wiper motor will stop wiping water.
AUTO: automatic wiping *
- If the wiper combination switch is turned
to the
③
AUTO position, the automatic
wiping function will be activated, and the
wiper system will adjust the wiper speed
according to the current rainfall and the
real-time vehicle speed.
- The automatic wiping function can be
activated or deactivated via “Settings →
Body Accessories → Other Accessories
→ Automatic Wiper” in the AV system.
When this function is deactivated, the
function of the wiper in the AUTO position
is equivalent to that in the INT position.
- Rotate the knob ⑦ up/down to adjust the
wiping sensitivity.
CAUTION
● If the instrument cluster displays “Sensor
Failure, Please Manually Control Wiper”,
for the sake of safety, you should
manually control the wiper and go to
the GAC Motor authorized shop for
inspection and repair in time.
● Before using the automatic wiping in
winter, please confirm whether the wiper
blade is frozen.
● It is recommended to deactivate the
automatic wiping function when washing
the vehicle, in dusty weather and in
rainless weather to avoid unintentional
action of the wipers which may cause
damage or personal injury.
● Automatic wiping is an auxiliary function.
The driver should manually operate the
wiper when necessary according to the
driving situation to ensure driving safety.
● When replacing the front windshield, the
rain light sensor needs to be replaced
together.
● When the sensor is installed with
streaks, scratches and stains, it may
cause automatic wiper misoperation.