140
5. Driving guide
Interface description
①
Indicates the detected vehicle ahead.
②
ACC indicator lamp:
-
The blue ACC indicator lamp
lights
up to indicate that the ACC is working
and there is a target vehicle ahead. The
gray ACC indicator lamp
lights up to
indicate that the ACC is ready and there is
target vehicle ahead.
-
The blue ACC indicator lamp lights up
to indicate that the ACC is working and
there is no a target vehicle ahead. The
gray ACC indicator lamp lights up to
indicate the ACC is ready and there is no
target vehicle ahead.
-
The yellow ACC indicator lamp
lights up to indicate that there is a fault,
and you should go to the GAC Motor
authorized shop for inspection and repair
in time.
③
Indicates the cruising speed set last time.
④
Set cruise control time interval with the
vehicle ahead.
When the braking capacity of ACC is not
enough to maintain a proper distance from the
vehicle ahead, ACC will send a “driver hands-
on operation request”, and the instrument
cluster will give a visible alarm and an audible
alarm. In this case, the driver shall depress
the brake pedal to reduce the vehicle speed
according to the system requirements.
Activating ACC
-
After the ENGINE START/STOP button
is set from the “OFF” position to the “ON”
position each time, ACC will automatically
enter the ready state. If the
button is
pressed, the corresponding blue indicator
lamp on the instrument cluster will come
on, and the vehicle will enter the ACC
status.
NOTE
● The minimum cruising speed that can
be set is 15 km/h.
● When the transmission is in other
positions than D, ACC cannot be
activated.
