75
4. Operation of systems and equipment
Manual headlamp leveling
Turn the knob
①
to manually level the
headlamp (low beam) at “0, 1, 2 and 3”
positions. The level of the headlamp will
decrease as the adjustment value increases.
Lamp on warning
When the ENGINE START/STOP button is
set to the “OFF” position with the headlamps
or position lamps on, if you open the driver’s
door, the system will send a buzzer sound and
the instrument cluster display will display the
message “Lamp On”.
Follow Me Home
-
Within 10 minutes after switching the
power supply switch to the “OFF” position,
if you turn the lamp switch from the “OFF”
position to other positions and then back
to the “OFF” position within about 2 s,
the Follow Me Home function will be
activated. In this case, the low beam will
stay on for about 30 s, if one of the doors
(four doors, engine hood and liftgate) is
opened within this 30 s, this function will
be re-timed, and then the low beam will
stay on for about 80 s, and if all the doors
are closed within this 80, this function will
be re-timed again, and then the low beam
will stay on for another 30 s.
-
Activate the front headlamp delay
off function through the AV system
“setting→body accessories→exterior
lighting→headlamp delay off”. Set the
lighting combination switch to “AUTO”
position and set the power supply switch
to the “OFF” position. In such a case, the
low beam will stay on for about 30 s, if
one of the doors (four doors, engine hood
and liftgate) is opened within this 30 s, this
function will be re-timed, and then the low
beam will stay on for about 80 s, and if all
the doors are closed within this 80, this
function will be re-timed again, and then
the low beam will stay on for another 30
s. (This applies to the automatic lighting
vehicle models).
Fog lamp switch
When the ENGINE START/STOP button is set
to the “ON” position with the low beam on, turn
the fog lamp switch
②
to turn on or off
(rear
fog lamp).
-
After the fog lamp switch
②
is turned to
the position and then released to the
“―” position, the rear fog lamp will come
on.
- When the fog lamp switch
②
is turned
to position again and then released to
return to position “―”, the rear fog lamp
will go out.
