240
8. Accident handling
-
Assemble the wheel bolt removal wrench,
jack special wrench and jack.
-
Extend the jack clockwise and lift the
vehicle to make the tire leave the ground.
WARNING
Improper use of jack will cause serious
injury.
● The jack must be used on a hard and
flat ground, or a hard backing plate
(no higher than 1 cm) can be placed
under the jack as required.
● Strictly observe the precautions for
jack operation.
● If there is a towing trailer, the trailer
must be separated from the vehicle.
● Observe the status of the vehicle
continuously during the lifting. If the
vehicle body is noticeably tilted, stop
the lifting, identify the problem, and
then lift the vehicle after solving the
problem.
WARNING
● The on-board jack can only be used
to lift the vehicle, not other heavy
objects or vehicles.
● When the jack is used, do not start
the engine, otherwise an accident will
occur.
● When lifting the vehicle with a jack,
remember not to place any part of
the body under the vehicle to avoid
accidents.
● If it is really necessary to work under
the vehicle, proper protective support
must be placed under the vehicle.
Remove flat tire
-
Unscrew the loosened wheel bolts with
a wheel bolt removal wrench when the
vehicle is lifted.
-
Remove the flat tire.
