76
4. Operation of systems and equipment
Hazard warning lamp
If you press the switch
with ENGINE
START/STOP button in any position, the red
indicator lamp on the switch will flash and the
hazard warning lamp will be turned on. Press
this switch again to turn off the hazard warning
lamp.
If the hazard warning lamp is turned on, all
turn signal lamps and the indicator lamps
or on the instrument cluster will flash
simultaneously.
The hazard warning lamp shall be turned
on in the following cases so as to attract the
attention of persons on the road and reduce
the risk of traffic accidents:
-
The vehicle is involved in any failure.
- The vehicle is at the tail end of a traffic
jam.
- The vehicle tows another vehicle or is
towed.
- The vehicle is temporarily parked due to
poor visibility.
NOTE
● The use of the hazard warning lamp will
consume the battery power, so please
turn it off when not in use.
● Be sure to strictly abide by the relevant
regulations when using the hazard
warning lamp.
● In case of emergency, if the hazard
warning lamp is faulty, other methods
that comply with relevant traffic
regulations must be taken to attract the
attention of other people on the road.
Vehicle assisted lighting
- If you press the unlocking button on
the remote control key within the effective
range, the position lamps will stay on for
a short time for purpose of helping you to
approach your vehicle. If you press the
unlock button on the remote control
key again, the position lamps can stay
on for another period of time. When you
get in the vehicle and switch the ENGINE
START/STOP button to the “ON” position,
the position lamps will go out.
Vehicle locating lighting
-
If you press the locking button on the
remote control key twice within a short
time, the position lamps will stay on for a
short time and the turn signal lamps will
flash 3 times for the purpose of helping
you to locate your vehicle.
