176
5. Driving guide
5.5 Parking assist systems
5.5.1 Rear parking assist (RPA)
The RPA uses the radar sensor to send and
receive the ultrasonic waves reflected from
the obstacle so as to measure the distance
between the vehicle and the obstacle.
On and off
-
Release the EPB of the vehicle, and set the
gearshift lever to “R” gear. When the reverse
speed is less than 10 km/h, the RPA will start
to work.
-
When the vehicle speed is more than 12 km/
h or the gearshift lever is in the “R” gear, if
the EPB is applied, the RPA will exit.
Dynamic view *
The dynamic view on the display indicates the
distance between the current vehicle and the
obstacle. In the figure, the outermost layer of
the vehicle is the green line, gradually yellow
line, orange line and red line inwardly. When
the obstacle is getting closer to the vehicle,
the color line will gradually change from the
outermost layer to the inner layer.
T h e c h a n g e o f t h e d y n a m i c v i e w i s
synchronized with that of the distance audible
alarm.
