241
8. Accident handling
-
In order to avoid the noise of the vehicle
during driving later on, please remember
the locations of various tools, put them
back in place after use and fix them.
CAUTION
After installing the wheels, you should go
to the GAC Motor authorized shop in time
to check the tightening torque of the wheel
bolts (the tightening torque of the wheel
bolts is 125 ± 10 N•m), otherwise the bolts
may become loose when the vehicle is
running, which is very likely to cause traffic
accidents.
WARNING
● The threads on the wheel bolts and
wheel hubs must be kept clean, so
that the bolts are easy to tighten,
and there must be no grease or other
attachments.
● When replacing a tire, if a bolt is
rusted or difficult to tighten, it must
be replaced and the threaded hole
must be cleaned.
● When the spare tire is not in use, it
must be reliably fixed at the spare
tire mounting position.
Install spare tire
-
Install the spare tire on the vehicle.
-
Install all wheel bolts and pre-tighten them
with wheel bolt removal wrench in the
order of
①
~
⑤
in the figure.
-
Make a verbal warning, after confirming
that there is no one around the vehicle,
reverse the jack wrench and lower the
vehicle.
-
Tighten all wheel bolts with the wheel bolt
removal wrench.
