61
4. Operation of systems and equipment
Setting of second height of liftgate:
When the height of opening of liftgate is
55%~98%, press and hold the inside switch of
liftgate for about 2 s to set the second height of
liftgate successfully, which will be indicated by
two sounds of the buzzer.
CAUTION
As the inside switch of liftgate sends an
action signal that does not identify opening
or closing, the liftgate will confirm the
relevant action according to the current
state and the last action. If the opening
action was previously suspended, pressing
the inside switch will close the liftgate; and
vice versa.
Easy open of PLG *
-
With the ENGINE START/STOP button
set to “OFF” position and the four doors
and liftgate closed, if you take the
intelligent remote control key to enter the
induction area within about 0.5 m from the
liftgate, the horn will sound once and the
high-mounted stop lamp will start to flash,
and if you stay there or take a step back,
the liftgate will be automatically opened
with the turn signal lamps flashing. If you
leave the induction area when the high-
mounted stop lamp flashes (4 times), the
liftgate will not be opened.
NOTE
● When the liftgate is automatically
opened, the horn will sound once, the
high-mounted stop lamp will flash 4
times, and the turn signal lamps will
flash twice.
● If you leave the liftgate induction area
when the high-mounted stop lamp is
flashing, this function can be paused,
and the liftgate will not be opened.
● If you press the button
on the
intelligent remote key when the high-
mounted stop lamp is flashing, this
function can be paused, and the liftgate
will not be opened. To re-activate the
easy open of liftgate function, you need
to open and then close one door.
● This function can be activated or
deactivated via “Settings → Body
A c c e s s o r i e s → D o o r / w i n d o w
Lock→Easy Open of Liftgate” in the AV
system.
