204
6. Use and maintenance
-
Wipe off the oil stains on the dipstick
using a clean cloth, and then insert the oil
dipstick to the end.
-
Pull out the oil dipstick again and read the
measured oil level: the oil level should be
between the minimum scale mark
①
and
the maximum scale mark
②
.
-
If there is too little engine oil, please
add engine oil in time. Otherwise, poor
lubrication will damage the engine.
Add oil
After checking the oil level, if it is necessary to
add oil, please follow the following steps:
-
U n s c r e w t h e o i l f i l l e r c a p
counterclockwise.
-
Add the oil in small quantities several
times, and check the oil level after each
filling.
-
When the oil level is close to the maximum
scale mark
②
, stop adding, install the oil
filler cap and tighten it clockwise.
WARNING
● Be careful when adding the engine
oil. Do not spill it. If the engine oil
gets on skin, be sure to rinse the skin
thoroughly.
● If too much oil is added, do not
start the engine. In this case, please
contact the GAC Motor authorized
shop as soon as possible. Otherwise,
the three-way catalytic converter may
be damaged.
● After the filling is completed, the oil
filler cap must be tightened in case
the oil splashing when the engine
starts and causes a fire.
● The engine oil is a toxic substance.
Store the engine oil in the original
container and keep out of reach
of children to avoid poisoning by
accidental ingestion.
● Do not add other lubricants to the
engine oil, otherwise the engine will
be damaged, and the fault caused
by adding lubricant is not within the
scope of warranty.
