130
5. Driving guide
NOTE
● The EPB can also be applied when the
ENGINE START/STOP button is in the
“OFF” position.
● After the vehicle is parked steadily, the
EPB should be applied first.
● When EPB is applied, running noise will
be generated, which is normal.
● If there is a trailer or the vehicle is
parked on a large slope (more than
30%), if the vehicle still slides after the
EPB is applied again, please step on
the brake pedal to brake and drive the
vehicle to a flat road and stop stably.
● After the EPB is applied, it can ensure
that the vehicle does not slide on a slope
with a gradient of 30% within 5min. If
sliding occurs during this duration, the
EPB will be applied again.
● Be sure to apply the EPB during
parking.
WARNING
When the vehicle is running, do not
apply the EPB for speed reduction
unless necessary, as the EPB only
applies braking force to rear wheels,
which is likely to cause traffic accidents.
Release static park brake
-
When the ENGINE START/STOP button
is in the “ON” position and the gearshift
lever is not in the P position, depress the
brake pedal and press the EPB button till
the button indicator lamp and the indicator
lamp in the instrument cluster
go
out, indicating that the EPB has been
released.
-
When the ENGINE START/STOP button
is in the “ON” position and the gearshift
lever is not in the D or R, close the
door, fasten the seat belt, and depress
the accelerator pedal to release EPB
automatically, till the indicator lamp in the
instrument cluster
go out, indicating
that the EPB has been released.
- When the ENGINE START/STOP button
is in the “ON” position, close the door,
fasten the seat belt, and shift the gear
from P to any other gaer to release EPB
automatically, till the indicator lamp in the
instrument cluster go out, indicating that
the EPB has been released.
