57
4. Operation of systems and equipment
The intelligent active locking function will not
work when one of the following conditions
occurs:
-
The ENGINE START/STOP button is set
to “ACC” or “ON” position.
- The intelligent remote control key is in the
car.
-
No intelligent remote control key is
detected within 2 m from the vehicle.
- The intelligent remote control key is
thrown into the vehicle from the door
window.
- The intelligent remote control key is in the
trunk.
-
Any door is ajar.
- The battery voltage is low.
- The PEPS antenna is faulty.
CAUTION
Please be careful not to leave children or
disabled people in the vehicle when using
the intelligent active locking function.
4.2.4 Flush-fit door handle
Electric flush-fit door handle *
Unlock the vehicle, and after the electric flush-
fit door handle unfolds automatically, pull the
handle to open the door.
NOTE
The electric flush-fit door handle function
can be activated or deactivated via “Settings
→ Body Accessories → Door/window Lock
→ Electric Flush-fit Door Handle” in the AV
system. Manually unfold the door handle
after closing.
When using the flush-fit door handle, please
read and observe the following precautions:
CAUTION
Stow the flush-fit door handle before
washing the vehicle, so as to avoid water
entry into the inside of door handle during
washing and thereafter vehicle damage.
WARNING
Prevent hand pinching by door handle
when locking the vehicle.
