31
3. Instructions for safe operation
Locking clip
If no means are provided on the child safety
seat for securing the seat belt, please install a
locking clip on the seat belt.
-
After the above steps 1 and 2, pull up the
shoulder belt and make sure the lap belt
is tensioned.
-
Firmly grasp the seat belt near the
tongue. Pinch the two parts of the seat
belt together so that they do not slip out of
the tongue. Unbuckle the seat belt.
Install the locking clip as shown. Place the clip
as close as possible to the tongue and insert
the tongue into the buckle. Proceed to steps 6
and 7.
Installing ISOFIX system
The rear seats (2nd-row) of this vehicle are
equipped with the ISOFIX system, and thus
suitable for the ISOFIX child safety seats.
WARNING
● The child safety seat anchorages
installed in this vehicle can be used
to fix the child safety seats only.
● Do not connect straps, hard and
sharp objects or any other objects
other than child safety seats to the
anchorages; otherwise children may
be endangered in the event of an
accident.
Rear seat
Open the cover, then you can see the front
anchorage
①
on the 2nd-row seat.
