103
4. Operation of systems and equipment
Rear windshield defrost/defog function
Click the AV system
*/
* button to
activate the rear windshield defrosting,
defogging function, electrically heating rear
windshield and exterior rearview mirror *.
Press the
*/ * button again to deactivate
the rear windshield defrosting and defogging
function. If you do not manually turn off the
rear windshield defrost/defog function, this
function will be automatically deactivated after
15 minutes.
NOTE
●
With the engine shut down, using
the rear windshield defrost function
for a long time will cause low battery
voltage, making it impossible to start
the engine.
●
The rear defrosting function will
be limited to ensure the starting
performance under low battery
conditions.
defogging function.
CAUTION
● When the temperature is set to the
lowest, the defrost/defog function
will cause the outer surface of the
windshield to mist up, affecting the
driver’s visibility and probably causing
serious accidents. When using the
defrost function, it is recommended to
set the temperature to a hot or warm
position.
● When using the defrost/defog function,
if you manually turn off the A/C cooling
function, it will cause the front windshield
to mist up, affecting the driver’s visibility
and probably causing serious accidents.
● As for the defrost and defog functions,
for quick defrosting and defogging, the
air volume is set to level 5 or above by
default, and the noise at the air outlet
is relatively large. If you want to reduce
the noise, you can manually reduce the
air volume on the premise of ensuring
the driver’s sight.
Automatic mode *
The button indicator lamp will come on and the
A/C system will enter the auto running mode if
the “AUTO” soft key on the HVAC system A/C
interface and the “AUTO” button on the front A/
C panel are pressed. The following functions
will be automatically controlled according to
the set temperature:
- Outlet air temperature
- Outlet air volume
- Air supply mode
- Air circulation mode
- Working state of the A/C cooling function
-
Operating status of the plasma purifier
Click the soft key or soft key to exit
the HVAC system automatic mode.
Front windshield defrosting and defogging
Press the front A/C control panel button
or click AV system soft key. The button
indicator lamp lights up, and the front
windshield defrosting and defogging function
are turned on.
Press the button
again to turn off the button
indicator lamp, turn off the front windshield
defrosting and defogging function, and return
to the state before defrosting; Or press the
AUTO button to enter the automatic mode to
turn off the front windshield defrosting and
