209
6. Use and maintenance
Replace front windshield wiper blade
-
Switch the vehicle power to the “ON”
position and then to the “OFF” position.
-
Set the wiper combination switch to MIST
position within about 10 s, and the wiper
arm will run for half a cycle and then stop.
NOTE
When the wiper switch is in the “OFF”
position, in the AV system “Setting → Body
Accessories → Other Accessories”, click
the soft key of “wiper maintenance mode”,
the wiper arm will stop after half a cycle of
operation; click the right soft key, and the
wiper arm will reset.
-
Pull up the wiper arm, press the locking
button-arrow-, and remove the wiper
blade.
-
Slowly lower the wiper arm.
-
Install the new wiper blade to the wiper
arm according to the reverse steps until
you hear a “click” sound.
-
Gently put the wiper arm back onto the
windshield.
-
S w i t c h t h e v e h i c l e p o w e r t o t h e
“ON” position, and the wiper arm will
automatically return.
