211
6. Use and maintenance
Check brake fluid level
After the engine has cooled down, check
whether the brake fluid level is between the
maximum scale mark “MAX” and the minimum
scale mark “MIN”.
During the use of the vehicle, the brake fluid
level will slightly drop due to the worn brake
linings and automatic adjustment.
If the brake fluid level drops significantly or
drops below “MIN” in a short period of time, it
indicates that there may be a leakage in the
brake system.
Add brake fluid
In order to ensure the normal operation of the
brake system, the added brake fluid shall meet
the specification:
-
Unscrew the brake fluid reservoir cover
counterclockwise.
-
Stop adding when the fluid level reaches
the maximum scale mark “MAX”.
-
Tighten the brake fluid reservoir cover
clockwise.
NOTE
● Be sure to carefully read and observe
the relevant warning instructions
before opening the engine hood.
● If the brake level is below the lower
limit mark “MIN”, brake fluid must be
added.
● If the brake system warning lamp
does not go out or comes on again
during driving after adding the brake
fluid, there may be leakage in brake
system that causes the brake level
decreasing too fast or the brake
system may be faulty. In this case, do
not continue driving. Please contact
the GAC Motor authorized shop for
inspection and repair in time.
