179
5. Driving guide
WARNING
● When cleaning the radar sensor with
the high-pressure cleaner, it shall
be short-time and gentle, and the
distance between the nozzle and the
sensor shall be at least 30 cm.
● If water droplets are attached to
the surface of the radar sensor,
the sensitivity of the sensor will
decrease. Just wipe off the water
droplets attached to the sensor to
restore its sensitivity.
● The surface of some subjects may
not reflect the signal from the radar
sensor, so the radar sensor cannot
detect such subjects or people
wearing such clothing.
● Noise sources outside the vehicle
may interfere with the radar sensor,
preventing it from detecting any
target.
● The radar sensor is a precision
component. Do not disassemble or
repair it without permission. The
Company will not assume quality
guarantee for any damage caused
by unauthorized disassembly and
maintenance.
5.5.2 Reverse image system*
The reverse image system can provide 130°
wide-angle video, and can display a wide
range of rear video images on the AV system
display, allowing the driver to master various
complex road conditions behind the vehicle
and improving reversing safety.
On and off
When the vehicle power is in the “ON” position
and the gear is shifted to the “R” position, the
reverse image system will automatically start
to work, and the AV system display will start
to display the rear image and the distance
reference lines.
When the gear is shifted out of “R” position,
the reverse image system will exit and the AV
system will exit the reverse image display.
WARNING
The reverse image system cannot
replace the driver’s observation of the
surrounding environment. The driver
should concentrate and reverse the
vehicle safely according to the actual
situation.
Dynamic trajectory
The display shows the wheel trajectory and the
body driving trajectory:
①
Reverse radar display area
②
Reverse image display area
