14
3. Instructions for safe operation
CAUTION
● Before driving, please check whether
there are any heavy objects on the front
passenger’s seat to avoid the system
mistakenly determining that the seat is
occupied and issuing a false alarm.
● If the alarm remains on after the seat
belt is fastened correctly, it means that
the seat belt reminder fails. In that
case, please contact the GAC Motor
authorized shop for inspection in time.
WARNING
Never insert the substitute of seat belt
tongue into the buckle to eliminate the
seat belt alarm.
: Rear seat belt indicator lamp*
If rear seat belt indicator lamp is on in white, it
indicates that the seat belt is fastened, and if
the indicator lamp is on in red, it indicates that
the seat belt is not fastened or the seat belt
system is faulty. If the indicator lamp stays
red after the seat belt is fastened correctly,
it means that the SRS is failed. In that case,
please go to the GAC Motor authorized shop
for inspection in time.
The rear seat belt indicator lamp is on for a
period of time and then goes out, and it will
light up under the following conditions:
-
The rear passenger does not fasten the
seat belt when the engine starts.
-
The rear passenger does not fasten the
seat belt when the rear door is opened/
closed.
-
The rear passenger fastens or unfastens
the seat belt.
3.2.2 Seat belt
Seat belt indicator lamp
: Driver’s seat belt indicator lamp
: Front passenger’s seat belt indicator lamp
When the ignition switch is set to “ON” position,
the alarm message appears as follows:
-
when the vehicle speed is lower than 20
km/h, if the driver or front passenger does
not fasten the seat belt, the corresponding
indicator lamp in the instrument cluster
will flash for about 6 s and stay on.
-
when the vehicle speed is higher than
or equal to 20km/h, if the driver or front
passenger does not fasten the seat belt,
the corresponding indicator lamp in the
instrument cluster will flash for a period
of time and stay on, accompanied by an
alarm message and a continuous audible
alarm.
