58
4. Operation of systems and equipment
Ice-breaking operation guide on flush-fit
door handle at low temperature
When the key is close to the vehicle, the
vehicle will automatically detect the remote
control key. At this time:
Method 1:
Applicable to electric flush-fit door handle:
1. If a small amount of ice accumulates
between the door handle and the door, the
door handle can be electrically unfolded.
At this time, please press the remote
control key to electrically unfold and fold
the door handle 3 times to remove the
residual ice.
2. If there is a lot of ice accumulated
between the door handle and the door,
and the door handle cannot be electrically
unfolded, you can manually press the tail
end of the handle to make the tail end of
the handle tilt up to break ice. If the handle
still cannot be electrically unfolded, you
need to manually deice with the following
operations:
- Hit the circumference of the door handle
with a slight force from the bottom
of the fist to destroy and release the
accumulated ice, and electrically unfold
the door handle by pressing the remote
control key.
- Repeat the steps by increasing the force
as needed.
WARNING
The force of hitting the circumference of
the door handle must not approximately
cause dent of the door sheet metal.
3. After the door handle can be moved,
unfold and fold the door handle several
times to remove the residual ice and
ensure that the door handle can be fully
retracted in place.
Method 2:
Pour hot water to break the ice.
