Fujitsu PRIMERGY TX140 S1, Upgrade And Maintenance Manual

Page: 180 / 588

180 Upgrade and Maintenance Manual
TX140 S1
Hard disk drives / solid state drives
http://manuals.ts.fujitsu.com
(EMEA market) or
http://jp.fujitsu.com/platform/server/primergy/manual/
(Japanese
market).
Ê
If applicable, open the rack door as described in section "Opening the rack
door" on page 61 .
Ê
When working on a tower server, open the HDD bay cover as described in
section
"Removing the HDD bay cover" on page 76 .
7.3.3.3 Removing a 3.5-inch HDD module
Figure 78: Disconnecting a 3.5-inch HDD module
Ê
While pressing down on the locking button (1) fold up the lever (2).
I
Thereby, the HDD module is pushed out of its drive bay by about 1 cm
and disconnected from the SAS / SATA backplane.
Ê
Wait about 30 seconds to allow the hard disk drive to spin down.