Fujitsu PRIMERGY TX140 S1, Upgrade And Maintenance Manual

Page: 330 / 588

330 Upgrade and Maintenance Manual
TX140 S1
Accessible drives
12.2 Installing accessible drives
12.2.1 Required tools
●
Preliminary and concluding steps:
– Phillips PH2 / (+) No. 2 screw driver
●
Installing accessible drives:
– Phillips PH2 / (+) No. 2 screw driver
12.2.2 Preliminary steps
Before installing an accessible drive, perform the following steps:
Ê
Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 93 .
Ê
If applicable, open the rack door as described in section "Opening the rack
door" on page 61 .
Ê
Shut down the server as described in section "Shutting down the server" on
page 61 .
Ê
Remove the AC power cord from the cable tie and disconnect it from the
system as described in section
"Disconnecting power cords" on page 63 .
Ê
When working on a rack-mounted server, extend it out of the rack as
described in section
"Extending the server out of the rack" on page 65 .
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page 66 .
Ê
Bring the server to its horizontal position.
Upgrade and Repair Units (URU)
Average task duration: 10 minutes